AnyControl Post-installation Steps for xiaomi

If you have recently installed the AnyControl app and want to ensure it is working properly, this simple step-by-step guide on post-installation actions for the AnyControl app on Xiaomi phones will help you complete the necessary settings. This app is designed to monitor the activities of children or employees, so to avoid any possible errors, make sure to apply the settings mentioned in this guide.

Post-installation actions on xiaomi

To ensure the proper functioning of the AnyControl app and make sure the app does not face disruptions over time, it is best to follow the steps below.

Clearing Security System Data

To prevent interference from previous settings with the performance of the AnyControl app, stored data in the security system must be cleared.

To do this, go to Settings > Apps > Manage apps, click on Security, then tap Clear data at the bottom of the screen.

Next, tap Clear all data.

Finally, click OK to confirm.

Activating Battery Usage Unrestricted Mode

If this option is restricted, the system may stop AnyControl app from running in the background. So, enable battery usage unrestricted mode by following the path below:

Go to Settings > Apps > Manage apps > AnyControl app (settings) and tap on Battery saver,

then select and activate the No restrictions option.

Now, as shown in the image below, you will see that Battery saver is set to No restriction.

Activating Autostart

To run AnyControl app automatically after the device is turned on, Autostart must be enabled. You can do this through the following path:

Go to Settings > Apps > Manage apps,

Select the AnyControl app (settings),

Finally, tap on the Autostart option.

Selecting the Balanced Battery Mode

One of the other modes that may disrupt the performance of the AnyControl app is the extreme battery saver mode. Therefore, you should select the balanced battery mode. To do this:

Go to Settings and then Battery,

On the slider bar, as shown in the image below, set the battery to the Balanced mode.

Disabling Ultra Battery Saver

The Ultra Battery Saver mode disables background apps and causes disruptions in the performance of the AnyControl app. To prevent such issues, follow these steps to disable it:

Go to Settings and then the Battery section,

Turn off the Ultra battery saver option.

Preventing Mobile Data Disconnection When Locked

If this option is enabled, the app may not stay connected to the internet when the screen is locked. To allow internet access even when the screen is locked, follow these steps:
Path:

Go to Settings and Battery,

Click on the gear icon,

Then tap on the Turn off mobile data when locked option and change both sections marked with a red box to Never, as shown in the image below.

Disabling Battery Saver in Advanced Settings

This option limits system resources and may stop the AnyControl app. To prevent this, apply the following settings:

Go to Settings and then Battery, and click on the gear icon.

Tap on Battery saver and turn it off.

Turning Off the Cleaner and Memory Scan

These features may identify and delete the app as a threat. To prevent this issue:

Go to the Security section and click on the gear icon,

Click on the Cleaner section,

In the Cleaner settings section, turn off the two options highlighted with a red box: Remind to clean and Scan app memory.

Locking AnyControl in Boost Speed Mode

This prevents the app from closing during memory optimization. To lock the app, follow these steps:

Go to the Security section, click on the gear icon, then go to Boost Speed and click on Lock Apps.

Turn on the AnyControl app (Settings) button.

Disabling Automatic Security Updates

Automatic updates can sometimes reset the app’s settings. To prevent this from happening, follow the steps below:

Go to the Security section. Tap on Security Scan.

Click on the gear icon.

Turn off the two options highlighted in the red box: Online Definitions and Auto Updates.

By disabling these settings, you can ensure that the automatic updates do not interfere with the app's configuration. Let me know if any part of this is unclear, and I can help explain it further!

Activating Access to Mobile Data and Wi-Fi

To ensure a constant connection of the AnyControl app to the internet, this option must be enabled.

Go to Settings, then Apps, and click on Manage apps. Select the AnyControl app (also known as Settings), and then go to the Restrict data usage section.

Enable the checkbox for Wi-Fi & Mobile data (WLAN & Mobile data) as shown in the image below, and click OK.

Summary

For the proper functioning of AnyControl app and to prevent system interruptions or limitations, all the above settings must be applied precisely. By doing so, you ensure that AnyControl is always running and recording data correctly.

➡️ Steps after installation on Samsung with Android 14

➡️ Steps after installation on Samsung with Android 13

If any issues arise, please clearly describe the error you encountered in the comments section. Note that if your phone is a Samsung, you must use the links above to access the post-installation steps.